DTC LAN Copper Structured Cabling System
Copper LAN Cable
- DTC Cat.6A U/FTP Cable
- DTC Cat.6A U/UTP Cable
- DTC Cat.6 U/UTP Cable
- DTC Cat.6 F/UTP Cable
- DTC Cat.5E U/UTP Cable
DtC Category 6A U/FTP 'Unscreened outer with individual screened foil twisted pairs'– Augmented Category 6 – cables, and associated connectors, take the performance capabilities of copper infrastructure to new levels. Designed to the current ISO, EN and TIA standards (EIA/TIA 5682-D & ISO/IEC 11801, IEC 61156 ) for Class EA augmented Category 6A performance these products are intended to deliver reliable, high network performance Each cable consists of 4 unscreened twisted pairs which are formed around specifically designed X filler, manufactured from lightweight flexible polyethelene.
DtC Category 6A – Augmented Category 6 – cables, and associated connectors, take the performance capabilities of copper infrastructure to new levels. Designed to the current ISO, EN and TIA standards (EIA/TIA 5682-D & ISO/IEC 11801, IEC 61156 ) for Class EA augmented Category 6A performance these products are intended to deliver reliable, high network performance Each cable consists of 4 unscreened twisted pairs which are formed around specifically designed X filler, manufactured from lightweight flexible polyethelene.
DtC Category 6 U/UTP cable is designed for optimal support of High-Speed data protocols delivering 1 Gbps performance to the workstation. Designed to be quick and easy to install the cable requires no specialist installation tools and is supplied in reelex packaging for fast, snag free installation. To reduce wastage the cable sheath is numbered from 305metre to 1 metre, allowing quick and easy calculation of the cable remaining in the box. The inclusion of a polyethylene cross filler ensures optimum cross talk performance.
DtC Category 5e Cable designed to be quick and easy to install the cable requires no specialist installation tools and is supplied in reelex packaging for fast, snag free installation. DtC Category 5e had been certify by International laboratories (UL) and the first brand certify in Telkom Indonesia. To reduce wastage each cable is numbered from 305metre to 1 metre, allowing quick and easy calculation of the cable remaining in the box.
Copper Patch Cable
- DTC Cat.6A U/UTP & F/UTP Patch Cord
- DTC Cat.6 U/UTP & F/UTP Patch Cord
- DTC Cat.5E U/UTP & F/UTP Patch Cord
DtC Category 6A patch leads consist of 4 twisted pairs of 24AWG stranded copper wires. These pairs are then cabled together, with different lay lengths to ensure optimum performance. Staggered pin RJ45 plugs, terminate the cable, and each lead is fitted with colour coded slimline moulded boots, suitable for use in high density router or switch blades.
- 6-50 micron RJ-45 staggered gold plated connectors
- Fitted with strain relief boots
- Suitable for 10 Gigabit, 10GBase-T, Ethernet application
- 100% Tested Wiring Sequence and Continuity
- Excellent Attenuation and Crosstalk Characteristics
- Connector with staggered pin configuration to limit cross talk
- Exceed Category 6A requirement
- They are available in a variety of the lengths (can make by customs)
- They are available in a variety of color (Blue, Red, Yellow, etc..)
- 6-50 micron RJ-45 staggered gold plated connectors
- Fitted with strain relief boots
- With or without reports made to the order
- 100% Tested Wiring Sequence and Continuity
- Excellent Attenuation and Crosstalk Characteristics
- Connector with staggered pin configuration to limit cross talk
- Exceed Category 6 requirement
- They are available in a variety of the lengths (can be custom length by order)
- 6-50 micron RJ-45 staggered gold plated connectors
- Fitted with strain relief boots
- With or without reports made to the order
- 100% Tested Wiring Sequence and Continuity
- Excellent Attenuation and Crosstalk Characteristics
- Connector with staggered pin configuration to limit cross talk
- Exceed Category 5E requirement
- They are available in a variety of the lengths (can be custom length by order)
Copper Keystone Jack
- DTC Cat.6A Keystone / Modular Jack
- DTC Cat.6 Keystone / Modular Jack
- DTC Cat.5E Keystone / Modular Jack
DtC Category 6A Keystone Jack, is a RJ45 Keystone Jack suitable for mounting in a range of housings from patch panels, faceplates and shutters to sub floor boxes, and work area distribution enclosures. The socket itself is housed in a high quality ABS plastic housing, which opens at the rear to reveal the IDC termination points. A choice of patch panel frames with either 24 or 48 port density in elegant black color are available.
The new style Jack provides Category 6A system performance and user-friendly installation features. A shielded is available to maximum protection from EMI/RFI interference, the compact size provides highdensity connectivity in the work area and telecommunications room.
- Meet or exceed TIA/EIA Cat6A requirements
- Shielding protects against EMI/RFI interference
- Housing : high temperature thermoplastic
- Compact jack design,8 positions and 8 conductors
- Contact : phosphor bronze , phosphor bronze with 6 to 50μ”gold plate
- Accept 22-26 AWG solid with a insulation diameter of 0.4-0.6 mm
- Easy to be terminated, low attenuation loss and high return loss
- High reliability and superior performance
- Available in different colors (Blue, Red, Black, etc...)
- Meet or exceed TIA/EIA Cat6 requirements
- Shielding protects against EMI/RFI interference
- Housing : high temperature thermoplastic
- Compact jack design,8 positions and 8 conductors
- Contact : phosphor bronze , phosphor bronze with 6 to 50μ”gold plate
- Accept 22-26 AWG solid with a insulation diameter of 0.4-0.6mm
- Easy to be terminated, low attenuation loss and high return loss
- High reliability and superior performance
- Available in different colors (Blue, Red, Black, etc...)
- Meet or exceed TIA/EIA Cat5E requirements
- Shielding protects against EMI/RFI interference
- Housing : high temperature thermoplastic
- Compact jack design,8 positions and 8 conductors
- Contact : phosphor bronze , phosphor bronze with 6 to 50μ”gold plate
- Accept 22-26 AWG solid with a insulation diameter of 0.4-0.6mm
- Easy to be terminated, low attenuation loss and high return loss
- High reliability and superior performance
- Available in different colors (Blue, Red, Black, etc...)
Copper Patch Panel
- DTC Cat.6A Patch / Modular Panel
- DTC Cat.6 Patch / Modular Panel
- DTC Cat.5E Patch / Modular Panel
- DTC Patch / Modular Panel Universal
- DTC Patch / Modular Panel Angle
DtC Modular Jack 24 port or 48 port 1U loaded patch panel frames allow for flexible port density from 1 through to 48 ports. The panels are comppliance for Category 6A high performance and come complete with a rear management bar, which can be fitted quickly without the need for tooling or fixings.
The DtC Modular Jack patch panel frame offers flexibility either through part loading to suit the installations and manage cost, or for pre-terminated requirements, allowing terminated jacks to be snapped into place quickly and easily.
- Design to mount to any standard 19” rack or cabinet
- 24 -port Cat 6A shielded/unshielded Patch panel
- Space saving, high-density 1U
- Black Electrostatic Powder-Coated Steel: phosphor bronze with tin plating over nickel . Meet or exceed the requirement of ANSI /TIA/EIA 568C.2
- Use keystone jacks and keystone inserts to configure your panel to accommodate a variety of schemes
- Sturdy Aluminum Plate around RJ 45 Jacks
- Phosphor bronze with 6-50 micro inches gold plated
- Available with T568 A. T568 B wiring pattern and meeting the requirement of Cat 6A standard
- Color Coded TIA/EIA 568A (international) and 568B (AT&T Standard) Wiring For Easy Installation
- Termination accepts 22,23-26 AWG (0.64 ,0.5 and 0.4 )solid wires
- Metal sheet: Corrosion resistant steel
- Plastic: fire self -extinguish high impact plastic
- Design to mount to any standard 19” rack or cabinet
- 24 -port Cat 6 shielded/ unshielded Patch panel
- Space saving, high-density 1U
- Black Electrostatic Powder-Coated Steel: phosphor bronze with tin plating over nickel . Meet or exceed the requirement of ANSI /TIA/EIA 568C.2
- Use keystone jacks and keystone inserts to configure your panel to accommodate a variety of schemes
- Sturdy Aluminum Plate around RJ 45 Jacks
- Phosphor bronze with 6-50 micro inches gold plated
- Available with T568 A. T568 B wiring pattern and meeting the requirement of Cat 6 standard
- Color Coded TIA/EIA 568A (international) and 568B (AT&T Standard) Wiring For Easy Installation
- Termination accepts 22,23-26 AWG (0.64 ,0.5 and 0.4 )solid wires
- Metal sheet: Corrosion resistant steel
- Plastic: fire self -extinguish high impact plastic
- Design to mount to any standard 19” rack or cabinet
- 24 -port Cat 5E shielded/ unshielded Patch panel
- Space saving, high-density 1U
- Black Electrostatic Powder-Coated Steel: phosphor bronze with tin plating over nickel . Meet or exceed the requirement of ANSI /TIA/EIA 568C.2
- Use keystone jacks and keystone inserts to configure your panel to accommodate a variety of schemes
- Sturdy Aluminum Plate around RJ 45 Jacks
- Phosphor bronze with 6-50 micro inches gold plated
- Available with T568 A. T568 B wiring pattern and meeting the requirement of Cat 5E standard
- Color Coded TIA/EIA 568A (international) and 568B (AT&T Standard) Wiring For Easy Installation
- Termination accepts 22,23-26 AWG (0.64 ,0.5 and 0.4 )solid wires
- Metal sheet: Corrosion resistant steel
- Plastic: fire self -extinguish high impact plastic
-
Design to mount to any standard 19” rack or cabinet
- Available for 24port and 48port / modular
-
Space saving, high-density 1U
-
Sturdy Aluminum Plate around RJ 45 Jacks
-
Termination accepts 22,23-26 AWG (0.64 ,0.5 and 0.4 )solid wires
-
Metal sheet: Corrosion resistant steel
DtC 24 Port 1U Modular V Patch Panel allows standard keystone jacks to be presented in an angled patch panel configuration. The patch panel is designed to accept all of the DtC unscreened and screened standard modular jacks from the Category 5e, 6 & 6A portfolios. This panel includes a rear cable manager to allow the cable to be dressed into the panel neatly and securely. The V shape of the panel presents the jacks at an angle to the front of the cabinet that reduces the strain on the jack that results from the patch lead. The patch lead is naturally routed to the cabinet/frame cable management reducing the requirement for rack mounted cable management bars. Earth bonding leads are supplied fitted to enable grounding if required.
-
Design to mount to any standard 19” rack or cabinet
-
Space saving, high-density 1U
-
Sturdy Aluminum Plate around RJ 45 Jacks
-
Termination accepts 22,23-26 AWG (0.64 ,0.5 and 0.4 )solid wires
-
Metal sheet: Corrosion resistant steel
Supporting Accessories
- DtC Cable Management
- DtC Blank Panel
- DtC Mounting Hardware / Faceplate
- DtC Connector RJ45 Shielded & Unshielded
- DtC Connector Plug Boot
- DtC Cable / Velcro Ties
- Feature: Standard EIA 19” rack and Cabinet mount
- Management improves the look of a closet or workstation , it is an essential element For easy adds , moves or changes , it is also crucial to maintaining cable integrity by Ensuring resisted steel and ABS
- Light weight ,easy to install or removal
- Custom-made cable management is acceptable
To improve cabinet appearance Blank Plates can be installed to cover unused space. Letterbox Panels allow patch cords to be fed to or from the rear of the cabinet.
- Design to mount to any standard 19” rack or cabinet
- Black Electrostatic Powder-Coated Steel
- Metal sheet: Corrosion resistant steel
- Custom-made available in size 1U, 2U, 3U and 4U
The wall plate is made from high-impact ASX plastic, making for years of aurable use. Each delivers high speed of for all your highspeed applications to the desktop. Perfectly blends into the decor of your home or office ,Protects and hides your network connections, Accepts all keystone inserts. Standard 110 type IDC termination makes installation fast and easy.
- One or Two ports faceplate
- Available in flat / 45° angle design with shutter that can prevent dust effectively
- Designed for for Cat 5e, Cat 6 or Cat.6A performance and meet EIA/TIA specifications
- Fit for RJ45 keystone jack outlet plates
- Packing includes two mounting screws for Installation
- Material: PC or ABS
- Color: white
We offer Hi Performa modular plugs in standard configuration terminate modular cords for patching or Work area application , modular plugs can be terminated to the exact cable length in order to Maintain a nearer, more organized installment , the plugs terminate twist pair cable with 22-26 AWG solid all plugs contracts have 50 micron inches of gold plating over nickel.
- 6-50 micron RJ-45 staggered gold plated connectors
- Fitted with strain relief boots
- Meet or exceed the requirement in the Cat 5e, Cat.6, & cAT.6A T568 A/B and T568 C.2 (Telecommunication requirement)
- 100% Tested Wiring Sequence and Continuity
- Excellent Attenuation and Crosstalk Characteristics
- Connector with staggered pin configuration to limit cross talk
- Contacts are nickel plated, phosphor bronze with 6 to 50u” gold plate
The RJ45 plug boots design incorporates a latch guard to protect the plug latch from snagging when pulling cords through pathways or cable managers.
The Velcro ties is made for easy maintenance copper cable network, available in 25mm x 250mm standard size.