DtC Patch Cord U/UTP and F/UTP

DtC Cat.5E/ Cat.6/ Cat.6A patch leads consist of 4 twisted pairs of 24AWG stranded copper wires. These pairs are then cabled together, with different lay lengths to ensure optimum performance. Staggered pin RJ45 plugs, terminate the cable, and each lead is fitted with colour coded slimline moulded boots, suitable for use in high density router or switch blades.

DtC Keystone Jack Shielded & Unshielded

DtC Keystone Jack, is a RJ45 Keystone Jack suitable for mounting in a range of housings from patch panels, faceplates and shutters to sub floor boxes, and work area distribution enclosures. A shielded is available to maximum protection from EMI/RFI interference, the compact size provides high density connectivity in the work area and telecommunications room.

DtC Patch Panel Modular Loaded Shielded

DtC patch panels comply with the EIA TIA Standard for enhanced Category 5, Category 6, Category 6A and are available in a choice of port density, the shielded version provided maximum protection from EMI/RFI interference.

DtC Patch Panel Modular Loaded Unshielded

DtC patch panels comply with the EIA TIA Standard for enhanced Category 5, Category 6, Category 6A and are available in a choice of port density.

DtC Connector RJ45

DtC Hi Performa modular plugs in standard configuration terminate modular cords for patching or Work area application , modular plugs can be terminated to the exact cable length in order to Maintain a nearer, more organised instalment , the plugs terminate twist pair cable with 26-22 AWG solid all plugs contracts have 50 micron inches of gold plating over nickel.

DtC Plug Boot for RJ45

The RJ45 plug boots design incorporates a latch guard to protect the plug latch from snagging when pulling cords through pathways or cable managers.

DtC Wall Modular Faceplate with shutter

The wall plate is made from high-impact ASX plastic, making for years of durable use. Each delivers high speed of for all your highspeed applications to the desktop. Perfectly blends into the decor of your home or office ,Protects and hides your network connections, Accepts all keystone inserts. Standard 110 type IDC termina on makes installation fast and easy.

DtC Angle Patch Panel Unloaded

DtC 24 Port 1U Modular V Patch Panel allows standard keystone jacks to be presented in an angled patch panel configuration. The patch panel is designed to accept all of the DtC unscreened and screened standard modular jacks from the Category 5e, 6 & 6A portfolios. This panel includes a rear cable manager to allow the cable to be dressed into the panel neatly and securely.

DtC Modular Patch Panel Unloaded

This range of panels have been designed to meet or exceed the latest ISO and TIA requirements for category 5e / 6 / 6A compliance. When installed with DtC cables and modular full link and channel compliance can also be achieved. All of the unloaded patch panel is designed to be suitable for all categories solu on either shielded and unshielded type, also include cable management bar for easy maintain the cable termination and documentation.

DtC Cable Management Vertical & Horizontal

DtC horizontal cable management can be used with all patch panels, rack and cabinet mount products. It mounts on standard 19”racks or cabinet and provided a clean, beautiful and simple, means of organising from small to large bundles of cables and patch cord.